Get in touch
If you have any questions about our machines, or interest in setting up a new machining process. Our expert team are more than happy to help.
R200
Increase productivity by two independent subsystems with full 5-axis capability
Insights into the R200
- The unique design of the R200 combines exceptional rigidity of the moving parts with an impressive dynamic behavior at rapid traverse speeds up to 45 m/min. At the same time, the design with vertical machine bed provides for optimized chip flow, so you do not have to worry about process reliability of the machine.
- 5-axis machining on workpiece front and rear allows an extremely large variety of parts
- A total of 12 stationary turning tools for particularly high rigidity and cutting performance
- High cutting volume by powerful motorized milling spindles at 18,000 rpm
- Best damping and guiding properties of the milling spindles result in better workpiece quality and extended tool lives
- Outstanding dynamics due to high rapid traverse speeds and accelerations
- Already included: the operating system iXpanel i4.0 readywith 18.5” touch screen and INDEXC200-4D based on Siemens S840D sl
Key Features
| Main spindle | Bar capacity | 65mm |
| Chuck diameter | 175mm | |
| Speed max. | 5,000rpm | |
| Power at 100% / 40% | 20/24kW | |
| Torque at 100% / 40% | 135/190Nm | |
| C axis resolution | 0.001 degree | |
| Slide travel Z | 390mm | |
| Rapid traverse Z | 45m/min | |
| Feed force Z | 4,000N | |
| Counter spindle | Bar capacity | 65mm |
| Chuck diameter | 175mm | |
| Speed max | 5,000rpm | |
| Power at 100% / 40% | 20 / 24kW | |
| Torque at 100% / 40% | 135 / 190Nm | |
| C axis resolution | 0.001degrees | |
| Slide travel X | 600mm | |
| Rapid traverse X | 45m/min | |
| Feed force X | 4,000N | |
| Slide travel Z | 390mm | |
| Rapid traverse Z | 45m/min | |
| Feed force Z | 4,000N | |
| Tool carrier 1 | Quill diameter | 190mm |
| Slide travel X | 350 (50 unter Spindelmitte)mm | |
| Slide travel Y | ± 80mm | |
| B-axis swivel angle | 270degrees | |
| Tool carrier 2 | Quill diameter | 190mm |
| Slide travel Y | ± 80mm | |
| B-axis swivel angle | 270degrees | |
| Motor milling spindle | Tooling system | HSK-T40 |
| Speed max | 18,000rpm | |
| Power at 100 % | 11kW | |
| Torque at 100% / 25% | 19 / 30Nm | |
| Solid tool places on motor milling spindle | 6 x VDI25 | |
| Tool magazine | Tool length max | 180mm |
| Tool diameter max | 50 (100 mit Einschränkungen)mm | |
| Tool weight max | 2kg | |
| Number of stations | 80 (120) | |
| Gantry-type removal unit | Slide travel Z | 1,365mm |
| Rapid traverse Z | 100m/min | |
| Workpiece length max | 200mm | |
| Workpiece diameter max | 65mm | |
| Workpiece weight max | 5kg | |
| Dimensions, weight, connecting power | Weight | ca. 11,000kg |
| Connecting power | 79kW | |
| Control | iXpanel - i4.0 ready | Basis Siemens S840D sl |
| Multi-Touch Screen | 18.5" |
R200 parts machined on an MCX900μ
“New developments such as our C100/C200 turning centre series and the new R200 turn-mill centres would require new machine beds that could not be machined by external manufacturers. So we had to expand our in-house capacity urgently.”