Get in touch
If you have any questions about our machines, or interest in setting up a new machining process. Our expert team are more than happy to help.
Hermle C 250
Within the model range, the C 250 can be seen as the entry-level model for 5-axis milling – and for the Hermle Performance-Line. Thanks to the wide-reaching swivelling range of the workpieces in the working area, the exploitation of the full traverse range and the large collision circle between the table sections, the C 250 has the largest working area in relation to the installation area. And it is constructed for everyday use: The application video shows the Hermle C 250 U in the 5-axis version machining a Rockerbox in Toolox33 for vehicle technology.
Contact the team
- The largest working area in relation to the installation area
- Large collision circle between the table sections
- The right chip disposal equipment for removing all types of chip from the working area
- Comprehensive fluid technology
- Can be transported without being dismantled
- No need for a foundation
| Traverse path | 600 x 550 x 450 mm | |
| Body | dia. 450 / H 355 | |
| Collision circle | dia. 770 mm | |
| Max. vertical table clearance | 550 mm | |
| Speed | 15000/18000 1/min | |
| Rapid traverse linear X-Y-Z | 35 m/min | |
| Rigid clamping table | 800 x 616 mm | |
| Max. table load | 1100 kg |