Get in touch
If you have any questions about our machines, or interest in setting up a new machining process. Our expert team are more than happy to help.
Index MS22-8
With the totally configurable INDEX MS22-8, we offer a machine concept that meets all requirements and the most stringent demands. Eight main spindles, up to two swiveling synchronous spindles, and up to sixteen tool carriers, which can be configured in XYZ, enable high-productivity manufacturing. All aspects of the INDEX MS22-8 were developed using state-of-the-art manufacturing technologies. Generously dimensioned and freely accessible, the work area minimizes setup cost, especially for changeovers. Unhindered chip fall is ensured even with full tooling.
Contact the team
- Two identical or two different workpieces can be machined in parallel resulting in faster cycle times.
- Eight-spindle machining with simultaneous rear end machining reduces cycle time and makes machining of highly complex workpieces possible.
- Versatility is the strong point of the MS22-8. Whether complex parts or different processes are involved – anything is possible
- Highly-dynamic slides with sliding guide (X-axis)
- Non-wearing Z-axis due to quills with hydrostatic support
- Chuck part machining with loading and unloading by robots
- Up to 16 tool holders with 1 or 2 axes and optional Y-axis can be used variably
- More options for rear end machining with hydraulically locked and extremely fast swiveling synchronous spindle
- Already included: the operating system iXpanel i4.0 readywith 18.5” touch screen and INDEXC200-4D based on Siemens S840D sl
| Working spindles 8 | Max. bar diameter mm 22 (24) | |
| Speed * rpm 10,000 | ||
| Power (at 100%/25% duty cycle) kW 8.7/15 | ||
| Torque (at 100% / 25% duty cycle) Nm 10 / 18 | ||
| Tool carrier 16 | Slide travel X mm 62 | |
| Slide travel Z mm 85 | ||
| Slide travel Y mm 24 | ||
| Synchronous spindle 1/2 | Max. clamping diameter mm 22 (24) | |
| Speed * rpm 10,000 | ||
| Power (at 100%/40% duty cycle) kW 9.2/12 | ||
| Torque (at 100% / 40% duty cycle) Nm 11 / 14 | ||
| Synchronous spindle swivel angle degrees 138 | ||
| Slide travel Z mm 120 | ||
| Number of tools for rear-end machining 3/6 | ||
| Optional back-boring slide | Tool carriers for rear-end machining 1/2 | |
| Slide travel X mm 62 | ||
| Number of tools for rear-end machining 3/6 | ||
| of which are live 2/4 | ||
| Dimensions, mass, and connected power (for maximum configuration level, without bar guide or loading magazine) | Mass kg approx. 7,100 | |
| Length mm 3,349 | ||
| Width mm 2,032 | ||
| Height mm 2,854 | ||
| Connected power ** 53-77 kW, 63-91 kVA, 91-131 A, 400 V, 50/60 Hz | ||
| Control | Siemens Sinumerik 840D Solution Line Options | |
| Options | Polygon turning, hobbing, tool monitoring, Y axis, transmit function |