Index MS24-6

With the INDEX MS24-6 multi-spindle automatic lathe, which can be configured according to manufacturers’ specific needs, INDEX is presenting a machine concept that meets stringent requirements and the highest demands. Six main spindles, up to two swiveling synchronized spindles, and up to twelve tool carriers, which can be freely configured as cross slides X/Y/Z or boring slides Z, enable highly productive machining options.

Contact the team
  • Coupled with electronic precision
  • Requirements with maximum stability
  • Front-opening machine for bar machining
  • Freely accessible and thus extremely user-friendly
  • Highly-dynamic slides with sliding guide (X-axis)
  • Non-wearing Z-axis due to quills with hydrostatic support
  • Rear-end machining with synchronized spindle
  • 6 tools maximum for backworking
Working spindles 6 Max. bar diameter mm 24
Speed * rpm 10,000
Power (at 100% / 25% DC) kW 8.7 / 15
Torque (at 100% / 25% DC) Nm 10 / 18
Tool carriers max. 12 Slide travel X mm 62
Slide travel Z mm 85
Slide travel Y mm ±13
Synchronized spindles max. 2
Max. clamping diameter mm 24
Speed* rpm 10,000
Power (at 100%/40% DC) kW 9.2 / 14
Torque (at 100% / 40% DC) Nm 11 / 14
Synchronized spindle swivel angle degrees 120 (157)
Slide travel Z mm 120
Max. number of tools for rear-end machining 6
Back-boring slides 1+2 (optional)
Tool carriers for rear-end machining 1 / 2
Slide travel X mm 62
Number of tools for rear-end machining 3
of which are live max. 2
Dimensions, mass, and connected power (at maximum equipment level, without bar guide or loading magazine) Weight kg approx. 5,700
Length mm 3,387
Width mm 1,906
Height mm 2,854
Connected power 73 kW, 87 kVA, 125 A, 400 V, 50 Hz
or 460-480 V, 60 Hz
Controller Siemens S840D Solution Line, with teleservice, spindle stop, C-axis as standard
Options Polygon turning, gear hobbing, tool monitoring, Y-axis, transmit function
*Speed limitations are necessary, depending on bar diameter, bar guide, and workpiece clamping.

INDEX Traub Machine Videos

Get in touch

If you have any questions about our machines, or interest in setting up a new machining process. Our expert team are more than happy to help.

Contact us